| Temperature |
-40C to 100 C |
| Test Voltage |
1000 VDC |
| Loss Factor |
0.01 maximum at 1 Khz |
| Insulation resistance |
25000 Megaohm minimum at 500 VDC, 1 Min |
| Dielectric used |
Polyester film |
| Electrode uses |
Amuminium Foil |
| Coil construction |
Extended Foil ( non-inductive) |
| Impregnanat Used |
Mineral Oil ( Bio-Degradable) |
| Internal contact |
High current capacity pressure contacts |
| Outrer casing |
Steel can, Zinc Plated; blue/yellew/passivation |
| Sealing |
Epozy topping/rubber seal |
| Manufacturing date |
Inedible emboss on metal can bottom |
| Usage |
Across magneto contact breaker points Noise suppressor for automobiles
general purpose electronic appliation. |
| Cable choice |
Standard tinned copper wires PVC insulated Tinnie copper solid
wire Treaded brass stud plug spring washer plus nut. Electrolytic
copper strip terminal. |
| Cable termination choice |
Ring tag, Flag tag, Tongue tag, Link Tag, Tab terminal, Bullet
terminal, Snap on receptable, Hook terminated copper wire. |
